Gear hub components

Quaxar sealed aluminium end caps for 4 mm outer casing, black, 10 pieces per pack. They finish...

Paper gasket for the hub-cap of a Rohloff SPEEDHUB 500/14 with a 36-hole hub shell. Rohloff's...

Paper gasket for the hub-cap of a Rohloff SPEEDHUB 500/14 with a 32-hole hub shell. Rohloff's...

Hub cap screws (9 pcs, 6-point star) – also used on the external cable box cover.

Adapter that connects a TRP electronic shifter to the E-14 DC-CAN Adapter 2.

Plastic cable box (ExBox) for the Speedhub external gear mech – the current replacement for the...

Workshop Speedhub oil set in bottles: 1 L cleaning oil and 500 ml all-season oil – for about 40...

Replacement paper gaskets for the axle ring of the SPEEDHUB 500/14, sealing the gear mech side....

The only way to order the Rohloff A12 reduction sleeves: a full set chosen from a measurement of...

Converts Shimano hydraulic brifters made in 2022 or later (GRX, 105, Ultegra, Dura-Ace) to...

Shift box for the Rohloff Speedhub 14 – shift with drop-bar brifters or flat-bar triggers instead...

Jagwire LEX 4 mm shift housing in black, sold by the metre. Linear steel strands around a...

Single black A12 axle bolt for Boost (148 mm) thru-axle Speedhub installations.

E-14 diagnostic kit for BES3 – cross-exchange fault finding, with 1000 mm connection cable.

Extension cable between the E-14 DC/DC-CAN converter and the shifter unit – choose the length.

E-14 2.0 shifter unit for e-bikes with the Bosch Smart System (BES3).

E-14 1.0 shifter unit for e-bikes with Bosch BES2 or Panasonic FIT1 (E-14 generation up to the...

E-14 DC-CAN Adapter 2 – connects the E-14 shifter unit to the e-bike system.

Replacement clamp with Torx screws for the E-14 trigger shifter.

E-14 DC/DC-CAN converter that powers and controls the E-14 shifter unit.

Ergonomic trigger-style handlebar control for electronic Rohloff E-14 shifting: shift up with the...

E-14 switch unit – handlebar control for electronic Speedhub shifting.

Gear 1 of the Speedhub shifting box – genuine Rohloff spare part.

Reversible steel splined sprocket for the Speedhub 500/14 – turn it over to double its service life.

Two identical small flange support rings for the Rohloff SPEEDHUB 500/14 – they stop the spokes...

11-speed trigger shifter for the Alfine 11 hub – multi-shift up to three gears at once, with gear...

8-speed trigger shifter for the Alfine 8 hub – light action, optical gear display, cable included.

Flange support rings (1 small, 1 large) – protect the Speedhub flanges from spoke pull-out.

Right-hand threaded A12 reduction sleeve, M12×1.5 – for DT Swiss / Maxle thru-axle frames.

Right-hand threaded A12 reduction sleeve, M12×1 – for Syntace X-12 V2 frames.

Right-hand A12 spacer for the sprocket side of Shimano E-Thru 12 mm dropouts, used with the 8592...

Left-hand A12 spacer for the disc brake side of Shimano E-Thru 12 mm dropouts, used together with...

Right-hand A12 reduction sleeve for Syntace X-12 (V1) dropouts.