Gear hub components

Torque arm clamp for TS hubs – fits chainstays up to 25 mm diameter.

Jubilee clips that fix the quick-release torque arm to the chainstay (CC versions).

TS axle nuts M10×1 with washers (2 pcs) for threaded-axle Speedhubs.

M5 adapter for mounting a fender or rack bolt on the OEM2 axle plate.

M6 support bolt with nut and washer for the OEM2 axle plate.

A12 axle bolt set with Nord-Lock® washers (2 bolts, 4 washers) for thru-axle Speedhub 500/14 hubs.

Replacement Nord-Lock® safety washers (4 pcs) for the A12 thru-axle bolts.

Left-hand A12 reduction sleeve for DT/Maxle, Syntace V1/V2 and Shimano E-Thru dropouts.

Right-hand threaded A12 reduction sleeve, M12×1.75 – for DT Swiss / Maxle thru-axle frames.

Left-hand conical A12 spacer for Syntace X-12 (V1) dropouts.

Right-hand A12 reduction sleeve for Syntace X-12 (V1) dropouts.

Left-hand A12 spacer for the disc brake side of Shimano E-Thru 12 mm dropouts, used together with...

Right-hand A12 spacer for the sprocket side of Shimano E-Thru 12 mm dropouts, used with the 8592...

Right-hand threaded A12 reduction sleeve, M12×1 – for Syntace X-12 V2 frames.

Right-hand threaded A12 reduction sleeve, M12×1.5 – for DT Swiss / Maxle thru-axle frames.

Washer for the A12 thru-axle mounting hardware of the Speedhub 500/14.

Flange support rings (1 small, 1 large) – protect the Speedhub flanges from spoke pull-out.

8-speed trigger shifter for the Alfine 8 hub – light action, optical gear display, cable included.

Pre-lubricated 4 mm SIS-SP shift housing, cut to length – sold per 0.5 m.

11-speed trigger shifter for the Alfine 11 hub – multi-shift up to three gears at once, with gear...

Two identical small flange support rings for the Rohloff SPEEDHUB 500/14 – they stop the spokes...

Reversible steel splined sprocket for the Speedhub 500/14 – turn it over to double its service life.

Gear 1 of the Speedhub shifting box – genuine Rohloff spare part.

E-14 switch unit – handlebar control for electronic Speedhub shifting.

Ergonomic trigger-style handlebar control for electronic Rohloff E-14 shifting: shift up with the...

E-14 DC/DC-CAN converter that powers and controls the E-14 shifter unit.

Replacement clamp with Torx screws for the E-14 trigger shifter.

E-14 DC-CAN Adapter 2 – connects the E-14 shifter unit to the e-bike system.

E-14 1.0 shifter unit for e-bikes with Bosch BES2 or Panasonic FIT1 (E-14 generation up to the...

E-14 2.0 shifter unit for e-bikes with the Bosch Smart System (BES3).

Extension cable between the E-14 DC/DC-CAN converter and the shifter unit – choose the length.

E-14 diagnostic kit for BES3 – cross-exchange fault finding, with 1000 mm connection cable.

Single black A12 axle bolt for Boost (148 mm) thru-axle Speedhub installations.