Gear hub components

Freewheel springs (2 pcs) – genuine Speedhub 500/14 spare part.

Hub cable Easy Set for the internal gear mech – for Speedhubs from serial no. 25300.

Concertina tubes that protect the hub cables of the internal gear mech (2 pcs, incl. 4 cable ties).

Replacement springs for the female bayonet connectors (8273).

Paper gasket kit for the axle ring, supplied with axle plate screws – for internal and external...

13° cable guide for mounting on cantilever brake bosses with the internal gear mech.

0° cable guide with frame clamp – routes the shift cables along the chainstay on frames without...

Barrel adjusters for the 0° and 13° cable guides used with the internal gear mech.

Lock ring for the Standard Lock and Slim Lock splined carriers (8540L / 8540SL).

Snap ring that secures the splined sprocket on the splined carrier.

Standard splined carrier with snap ring – mounts Rohloff splined sprockets on the Speedhub.

Slim splined carrier with snap ring – for frames where the standard chainline is not possible.

Standard splined carrier with lock ring – required for Gates Carbon Drive belt sprockets.

Slim Lock splined carrier – only for sprockets with 15 teeth or more and Carbon Drive belt...

Front chain guide for the chainring – stops the chain jumping off in rough terrain; adjustable...

Short DH chain tensioner (Shorty) for Speedhubs – for downhill and single-chainring setups.

DH chain tensioner Shorty with 10 mm offset for XXL 190/197 mm Speedhubs.

Rohloff chain tensioner for Speedhubs in frames with vertical dropouts.

Chain tensioner with 10 mm offset for XXL 190/197 mm Speedhubs (fatbikes), other gear hubs and...

Chain tensioner with 15 mm offset for XXL 190/197 mm Speedhubs.

Replacement arm for the Rohloff DH Chain Tensioner Shorty (8245 and 8245-10) – swap just the arm...

Conversion kit that brings Rohloff chain tensioners built before the end of 2002 up to the...

Replacement arm for the Rohloff Chain Tensioner 8250, 8250-10 and 8250-15 – fix a bent or damaged...

Replacement jockey wheels for the Rohloff chain tensioner (1 pair).

The standard bolt that fixes the Rohloff chain tensioner to the frame's derailleur hanger....

The black mounting plate with brass bushing of the Rohloff chain tensioner – the replacement for...

3.5 mm longer than the standard bolt: for the Rohloff chain tensioner on dropouts thinner than 7...

Spacers that set the lateral position of the Rohloff chain tensioner on the derailleur hanger, so...

Long mounting bolt with distancing washers for the Rohloff chain tensioner.

Replacement torsion spring for Rohloff chain tensioners built with the modified spring introduced...

The small retaining set (washer and circlip) for the Rohloff chain tensioner – replace it when...

Chainring spacers (5 pcs) for setting the correct chainline with a Speedhub.

Workshop Speedhub oil set in bottles (1 L cleaning oil + 500 ml all-season oil) with 40 oil drain...