Parts

FAT Bone torque adapter for Postmount brakes with 180 mm rotors – for fat bike Speedhubs.

FAT Bone torque adapter for Postmount brakes with 203 mm rotors – for fat bike Speedhubs.

CC PM axle plate for quick-release Speedhubs on frames with a Postmount disc brake mount (135/170...

A12 PM axle plate for thru-axle Speedhubs on frames with a Postmount disc brake mount...

PM Bone – anchors the Speedhub torque on frames with a direct Postmount brake mount.

CC PM axle plate plus PM Bone – complete torque support for quick-release Speedhubs on Postmount...

A12 PM axle plate plus PM Bone – anchors the thru-axle Speedhub torque on Postmount brake frames.

Bolt and circlip for the locating fork of the long torque arm (CC versions).

Quick-release head (clevis) for the CC torque arm.

Long torque arm for Speedhubs mounted with the standard axle plate.

Screws with washers for the Speedhub torque arm.

Torx screws (6 pcs) that fix the axle plate to the Speedhub 500/14.

Quick-release block for the CC torque arm.

Torque arm clamp for TS hubs – fits chainstays up to 25 mm diameter.

Jubilee clips that fix the quick-release torque arm to the chainstay (CC versions).

TS axle nuts M10×1 with washers (2 pcs) for threaded-axle Speedhubs.

M5 adapter for mounting a fender or rack bolt on the OEM2 axle plate.

M6 support bolt with nut and washer for the OEM2 axle plate.

A12 axle bolt set with Nord-Lock® washers (2 bolts, 4 washers) for thru-axle Speedhub 500/14 hubs.

Replacement Nord-Lock® safety washers (4 pcs) for the A12 thru-axle bolts.

Left-hand A12 reduction sleeve for DT/Maxle, Syntace V1/V2 and Shimano E-Thru dropouts.

Right-hand threaded A12 reduction sleeve, M12×1.75 – for DT Swiss / Maxle thru-axle frames.

Left-hand conical A12 spacer for Syntace X-12 (V1) dropouts.

Right-hand A12 reduction sleeve for Syntace X-12 (V1) dropouts.

Left-hand A12 spacer for Shimano E-Thru dropouts.

Right-hand A12 spacer for Shimano E-Thru dropouts.

Right-hand threaded A12 reduction sleeve, M12×1 – for Syntace X-12 V2 frames.

Right-hand threaded A12 reduction sleeve, M12×1.5 – for DT Swiss / Maxle thru-axle frames.

Washer for the A12 thru-axle mounting hardware of the Speedhub 500/14.

Flange support rings (1 small, 1 large) – protect the Speedhub flanges from spoke pull-out.

8-speed trigger shifter for the Alfine 8 hub – light action, optical gear display, cable included.

Pre-lubricated 4 mm SIS-SP shift housing, cut to length – sold per 0.5 m.

11-speed trigger shifter for the Alfine 11 hub – multi-shift up to three gears at once, with gear...