Booda Bike Alpine – Rohloff - M

You can pay via bank transfer or credit card.

Low maintenance is a core design goal of the Alpine Rohloff. The Rohloff Speedhub 500/14 is a sealed internal gear hub, so there is no derailleur to adjust. The Gates CDX carbon belt does not need lubrication and does not rust. The hydraulic disc brakes are one of the lowest-maintenance braking solutions available, and the Schwalbe G-One Allround tyres are tubeless-ready and supplied with Effetto Mariposa Végétalex sealant, which seals smaller holes. All Booda Bike models use standard components, so any general bike shop should be able to service them.

It uses the Rohloff Speedhub 500/14 (500/14 CC DB, 135 mm), a 14-speed internal gear hub sealed against the weather. The gear ratios range from 0.279 in 1st gear to 1.467 in 14th gear (the full list is under the Rohloff Speedhub heading). You shift from the handlebar with the Shimano GRX levers: the right-hand lever shifts up and the left-hand lever shifts down.

Yes. It has a Gates CDX carbon belt drive (115T belt, 55T front sprocket, 19T rear sprocket). The belt is clean and quiet, does not need lubrication and does not rust.

The drivetrain has few wearing parts: a sealed hub, a belt that needs no lubrication and no derailleur or cassette. The frame is steel, which dampens vibrations, and the fork is carbon. It rolls on Schwalbe G-One Allround 622x40 tubeless-ready gravel tyres and uses 160 mm hydraulic disc brakes. The bike weighs approximately 12 kg without accessories, and a Tubus Fly Classic rear rack is available as an option for touring.

Yes. It was designed for long tours and rougher terrain, and the Rohloff hub suits both urban commuting and long-distance touring. For everyday and touring use you can add dynamo or battery lighting and a Tubus Fly Classic rear rack when you customise the bike.

No. The base model comes without a lighting system, contrary to some of the photos. You can add a Supernova E3 Pure 3 dynamo set (with a Shutter Precision hub dynamo) or a battery-powered Supernova Airstream 2 set as a customisation.

The Alpine comes in S (rider height 155–170 cm), M (170–185 cm) and L (185–200 cm). The seat tube is 530, 560 and 590 mm, and the reach is 381, 381 and 398 mm respectively. The full geometry table is above.

Both are steel-frame, belt-driven gravel bikes with a Rohloff Speedhub 500/14. The Alpine Rohloff is shifted mechanically by cable with Shimano GRX levers. The Alpine e-14 has Rohloff E-14 2.0 electric shifting with TRP Hywire brake-shift levers, powered by your own power bank in the Apidura top tube pack supplied with the bike.

Not yet, but we’re working on it! :)

If the bike isn’t what you expected, you can return it within 14 days. Please make sure to pack it carefully so it arrives back to us in good condition. You can find the return conditions in our Terms and Conditions.

All our bikes are made using standard components, so they’re easy to maintain. This is a core principle across all our models. Thanks to this, any general bike shop should be able to service your Booda Bike.

This depends on the model and configuration, but most maintenance and assembly can be done with these tools: 4 mm Allen key, 5 mm Allen key, 6 mm Allen key, and a T25 Torx key.

Once you select your country, all prices will be shown with the applicable local VAT included.

Currently, we operate as an online-only store, but we’re working on making test rides possible in the near future.

Once we receive your order, we begin processing it. If all parts are in stock, our team will prepare the components in the order in which the orders were received. If something is out of stock, we’ll check the expected arrival or order it immediately. After that, your bike enters the assembly phase, which usually takes 1–2 business days. Once the bike is built, it undergoes a thorough quality check to ensure everything is assembled correctly. Then it gets packed and shipped straight to your door.

If you bought your bike through our website, just go to the “My Bicycle” tab in your profile — there you’ll find all components specific to your bike, so you’ll know exactly what you need and can easily reorder.

The customization options on our website are based on what we've learned actually make sense over the years. There are very few modifications we are both able and willing to make that aren’t listed online — but feel free to email us at info@boodabike.com and we’ll be happy to discuss it.