Rohloff Axleplate TS long
The Rohloff Axleplate TS long (8233L) is the standard TS axle plate with a longer axle journal – for threaded-axle Speedhub 500/14 hubs in frames with particularly thick dropouts, used with the torque arm.
Why the TS long plate?
For thick dropouts. The longer axle journal gives the M10x1 axle nut enough thread on thick dropouts. 
Torque arm anchoring. Works like the standard TS plate, with the torque arm and TS clamp. 
Trailer and stand friendly. The long version also leaves room to fit a bicycle trailer coupling or rear stand.
Long versus standard
The long version differs only in the longer axle journal; anchoring and mounting are the same as the standard TS plate (8233).
Who is it for?
- Riders with thick steel dropouts. When the standard plate leaves too little thread.
- Trailer users. Extra length for a trailer coupling on the axle.
Compatibility
| Rohloff part no. | 8233L |
|---|---|
| Hub | Speedhub 500/14 TS (threaded M10x1 axle) |
| Anchoring | Torque arm with TS clamp |
| Long version | Longer axle journal for particularly thick dropouts |
Frequently asked questions
How do I know if I need the long version?
If the axle nut does not engage enough thread on your dropout, the long plate is the solution. Measure your dropout thickness or ask us.
Does it fit CC hubs?
No, it is for TS hubs with threaded M10x1 axle.
About Rohloff
Rohloff AG is a German manufacturer from the Kassel area, best known for the Speedhub 500/14 – a sealed 14-speed gear hub with evenly spaced gears. Rohloff sells every spare part as an individual item, so a Speedhub can be serviced and adapted to a new frame instead of being replaced.
BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and parts. We build Speedhub bikes with Gates belt drive ourselves – if you are unsure which part fits your hub or frame, ask us before ordering.