Rohloff Drain screw – 10 units.
The Rohloff Drain screw workshop pack (Art. 8520) contains 10 oil drain screws with fresh seals for the SPEEDHUB 500/14 – for workshops and riders who look after several hubs.
Why the 10-pack?
Ten screws. The same drain screw as 8205, packed for workshop use.
For every oil change. A fresh screw whenever the old seal is worn.
Same spec. 3 mm Allen key, 0.5 Nm, never deeper than flush with the hub shell.
Always in stock. No waiting for a single small part during a service.
Made for the service bench
Rohloff recommends an oil change every 5000 km or once a year. A workshop servicing several SPEEDHUBs uses drain screws regularly.
Who is it for?
- Bike workshops. Standard stock for SPEEDHUB oil changes.
- Rental and fleet operators. Several SPEEDHUB bikes, one stock.
- Clubs and tour groups. Share a pack among riders.
Specifications
| Rohloff part number | 8520 |
|---|---|
| Contents | 10 drain screws |
| Single part | 8205 |
| Tool / torque | 3 mm Allen key, 0.5 Nm |
| Fits | SPEEDHUB 500/14 |
Frequently asked questions
Is it the same screw as 8205?
Yes, 8520 is the pack of 10.
When should the screw be replaced?
When its thread sealant is worn; otherwise it may be reused.
Which oil should I use?
Only Rohloff oils – other lubricants or cleaners can damage the nylon parts inside the hub.
About Rohloff
Rohloff AG from Fuldatal near Kassel, Germany, builds the SPEEDHUB 500/14: a 14-speed gear hub with evenly spaced gears, a 526% gear range and a sealed oil bath. As robust as the hub is, Rohloff sells small wear and replacement parts individually, so a SPEEDHUB is repaired, not replaced.
BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and parts. We sell genuine Rohloff parts and we are happy to help you identify the right one for your hub version.