Cart

Import VAT and duties

For orders outside the EU, the price shown is net, without Hungarian VAT.

Import VAT (VAT, GST or consumption tax, depending on the country) and any customs duty are charged by your country's authorities or the courier when the parcel arrives. The amount depends on your country's rules and the value of the order.

We do not collect these amounts and they do not appear in the cart. Your local customs authority or the courier can give you the exact figure.

My products (0)
Your cart is currently empty.
-25%

Rohloff E-14 DC/DC-Can Converter to Shifter Unit Cable - 700 mm

12.10 EUR
16.11 EUR
Extension cable between the E-14 DC/DC-CAN converter and the shifter unit – choose the length.
SKU: 8807
Length
400 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
In stock
Add to cartAdd to cart
International Shipping
14-day refund
Lifetime support
Three years warranty

The Rohloff E-14 Connection Cable (Art. 8804–8810) links the E-14 DC/DC-CAN Converter or DC-CAN Adapter in the frame to the E-14 Shifter Unit at the hub – available in seven lengths from 400 to 1000 mm.

Rohloff E-14 connection cable between DC/DC-CAN converter and shifter unit
Rohloff E-14 DC/DC-CAN Converter to Shifter Unit Cable, 8804–8810.

Why the right cable length matters

  • Seven lengths. 400, 500, 600, 700, 800, 900 and 1000 mm – the right length depends on frame size.
  • Lilac 6-pole. The cable uses the lilac 6-pole Higo connectors between converter/adapter and shifter unit.
  • Clean routing. A cable of the right length avoids loops that can catch spokes or the brake rotor.
  • Both E-14 generations. Listed in the system overview of the first E-14 and of the E-14 2.0 with Bosch Smart System.
Rohloff E-14 connection cable with lilac connectors

Handle with care

Rohloff asks you not to kink, twist or clamp the cable, not to pull on the cable itself when separating connectors, and never to use contact spray.

Damaged cables or cables with damaged insulation must be replaced immediately.

Rohloff E-14 connection cable, 1000 mm version

Choosing the length

The converter or adapter sits roughly in the middle of the bike, the shifter unit at the rear hub. Measure the cable route through your frame before ordering.

Who is it for?

  • E-14 owners with a damaged cable. Cables are a separate part and can be replaced.
  • Frame swaps and rebuilds. A different frame size may need a different length.
  • Workshops. For E-14 installations and repairs.

Variants

8804400 mm
8805500 mm
8806600 mm
8807700 mm
8808800 mm
8809900 mm
88101000 mm
ConnectsDC/DC-CAN Converter 8802 or DC-CAN Adapter 8802-04/-05 to E-14 Shifter Unit

Frequently asked questions

Which length do I need?

Measure the route from the converter/adapter in the frame to the shifter unit at the hub, and choose the next length up.

Is this the cable for the handlebar switch?

No. This is the lilac 6-pole cable to the shifter unit; the switch unit uses a blue 4-pole connector.

Can I unplug it with the e-bike on?

No. Switch the system off first; Rohloff warns that disconnecting while on can damage components.

About Rohloff

Rohloff AG from Fuldatal near Kassel, Germany, builds the SPEEDHUB 500/14: a 14-speed gear hub with evenly spaced gears, a 526% gear range and a sealed oil bath. As robust as the hub is, Rohloff sells small wear and replacement parts individually, so a SPEEDHUB is repaired, not replaced.

BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and parts. We sell genuine Rohloff parts and we are happy to help you identify the right one for your hub version.