Cart

Import VAT and duties

For orders outside the EU, the price shown is net, without Hungarian VAT.

Import VAT (VAT, GST or consumption tax, depending on the country) and any customs duty are charged by your country's authorities or the courier when the parcel arrives. The amount depends on your country's rules and the value of the order.

We do not collect these amounts and they do not appear in the cart. Your local customs authority or the courier can give you the exact figure.

My products (0)
Your cart is currently empty.
-25%

Rohloff E-14 Replacement clamp with Torx screws for Trigger Shifter

4.62 EUR
6.15 EUR
Replacement clamp with Torx screws for the E-14 trigger shifter.
SKU: 8196
In stock
Add to cartAdd to cart
International Shipping
14-day refund
Lifetime support
Three years warranty

The Rohloff E-14 Replacement Clamp with Torx Screws (8196) is the handlebar clamp and its two Torx screws for the Rohloff E-14 Trigger – the quick, low-cost fix when the original clamp cracks in a fall or a screw goes missing during a cockpit rebuild.

Rohloff 8196 black handlebar clamp for the E-14 Trigger with two Torx screws
Rohloff 8196: trigger clamp with two Torx screws.

Why the genuine clamp?

  • Made for the E-14 Trigger. The trigger body and clamp lock together with a tongue-and-groove joint that allows only one mounting position, so the trigger always sits as Rohloff intended.
  • Torx screws included. Rohloff tightens the trigger clamp with two TX10 screws to 0.8 Nm – the screws come with the clamp.
  • Replace the clamp, keep the trigger. A damaged clamp does not mean a new trigger: swap just the part that broke.
  • Secure grip on the bar. A firm, correctly fitted clamp keeps the trigger from rotating on the handlebar, so every shift lands where your thumb expects it.

Who is it for?

  • E-14 riders after a fall. The clamp is the part that takes the knock when the bike goes down.
  • Anyone rebuilding the cockpit. New handlebar, new grips or new brake levers – fit the trigger with a fresh clamp and screws.
  • Workshops. A small genuine part worth keeping in the drawer for E-14 service jobs.

Compatibility

FitsRohloff E-14 Trigger
Contents1 handlebar clamp, 2 Torx screws (as pictured)
Handlebar diameter22.2 mm (as specified by Rohloff for the trigger)
ScrewsTX10, 0.8 Nm
PositionRight side of the handlebar, between brake lever and grip

Frequently asked questions

How do I tighten the clamp correctly?

Rohloff specifies tightening the first TX10 screw to 0.8 Nm and then the second one to 0.8 Nm. Use a small torque tool – the screws are small and easy to overtighten.

Can the trigger be mounted on the left side?

No. Rohloff specifies the E-14 Trigger for the right side of the handlebar only, between the brake lever and the grip, with the cable pointing to the bar centre.

Does it fit the E-14 Switch Unit (8801)?

This clamp is listed for the E-14 Trigger. For the switch unit, send us a photo and we will check which part you need.

About Rohloff

Rohloff AG designs and builds the SPEEDHUB 500/14 in Fuldatal, Germany: a 14-speed gear hub with a 526% gear range that has proven itself for more than 20 years on touring, tandem, cargo and e-bikes.

BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and genuine spare parts. Not sure which part fits your hub? Send us the serial number and a photo of your hub and we will check it for you.