Cart

Import VAT and duties

For orders outside the EU, the price shown is net, without Hungarian VAT.

Import VAT (VAT, GST or consumption tax, depending on the country) and any customs duty are charged by your country's authorities or the courier when the parcel arrives. The amount depends on your country's rules and the value of the order.

We do not collect these amounts and they do not appear in the cart. Your local customs authority or the courier can give you the exact figure.

My products (0)
Your cart is currently empty.
-25%

Rohloff FAT Bone for 203 mm rotors – for Postmount

26 800 HUF
35 700 HUF
FAT Bone torque adapter for Postmount brakes with 203 mm rotors – for fat bike Speedhubs.
SKU: 8557
In stock
Add to cartAdd to cart
International Shipping
14-day refund
Lifetime support
Three years warranty

The Rohloff FAT Bone 203 (8557) is the torque adapter for XXL SPEEDHUBs in fat bike frames with a 180 mm post-mount brake mount: it anchors the hub torque via the OEM2 axle plate and positions the caliper for a 203 mm rotor – maximum braking power for heavy fat bikes.

Rohloff FAT Bone 8557 torque adapter for 203 mm rotors
Rohloff FAT Bone for 203 mm rotors.

Why the FAT Bone 203?

  • Big rotor, strong brake. A 180 mm post-mount frame becomes a 203 mm rotor setup – useful for loaded fat bikes and long descents.
  • Torque support built in. The OEM2 axle plate locks into the FAT Bone, so no separate torque arm is needed.
  • Hardware included. M6x20 countersunk bolts for the frame (6–8 Nm) are supplied; the caliper is fitted with its original bolts.
  • Rohloff-tested combination. Part of the official XXL mounting concept for 190/197 mm frames.

Who is it for?

  • Heavy-duty fat bike riders. Bikepacking with luggage on snow or sand, where braking reserves matter.
  • Builders of XXL SPEEDHUB bikes. The matching part for frames with a 180 mm post mount.

Compatibility

HubsSPEEDHUB 500/14 XXL: CC OEM2 190 mm, A12 OEM2 197 mm
Frame brake mountPost mount direct, 180 mm
Rotor size203 mm (Rohloff 4-bolt disc on the DB hub cap)
Frame boltsM6x20 countersunk, 6–8 Nm (included)
Not forTandems; 140 mm or 203 mm post-mount frames

Frequently asked questions

What if my frame has a 160 mm post mount?

Then the FAT Bone 180 (8556) is the right part, with a 180 mm rotor.

Is there anything to check with a quick-release (CC) axle?

Yes. With the CC 190 mm axle the anchoring point must be on or behind a line through the dropout slot. With the A12 197 mm thru axle this is not necessary.

Which axle torque does Rohloff specify?

CC axle 7 Nm, A12 axle 15 Nm. Afterwards always check that the brake works properly.

About Rohloff

Rohloff AG designs and builds the SPEEDHUB 500/14 in Fuldatal, Germany: a 14-speed gear hub with a 526% gear range that has proven itself for more than 20 years on touring, tandem, cargo and e-bikes.

BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and genuine spare parts. Not sure which part fits your hub? Send us the serial number and a photo of your hub and we will check it for you.