Our products

Long mounting bolt for the Rohloff chain tensioner.

Hanger for the Rohloff chain tensioner.

Mounting bolt for the Rohloff chain tensioner.

Replacement jockey wheels for the Rohloff chain tensioner (1 pair).

Replacement arm for the Rohloff chain tensioner.

Conversion kit for the Rohloff chain tensioner.

Replacement arm for the DH chain tensioner Shorty.

Chain tensioner with 15 mm offset for XXL 190/197 mm Speedhubs.

Chain tensioner with 10 mm offset for XXL 190/197 mm Speedhubs (fatbikes), other gear hubs and...

Rohloff chain tensioner for Speedhubs in frames with vertical dropouts.

DH chain tensioner Shorty with 10 mm offset for XXL 190/197 mm Speedhubs.

Short DH chain tensioner (Shorty) for Speedhubs – for downhill and single-chainring setups.

Front chain guide for the chainring – stops the chain jumping off in rough terrain; adjustable...

Slim Lock splined carrier – only for sprockets with 15 teeth or more and Carbon Drive belt...

Standard splined carrier with lock ring – required for Gates Carbon Drive belt sprockets.

Slim splined carrier with snap ring – for frames where the standard chainline is not possible.

Standard splined carrier with snap ring – mounts Rohloff splined sprockets on the Speedhub.

Snap ring that secures the splined sprocket on the splined carrier.

Lock ring for the Standard Lock and Slim Lock splined carriers (8540L / 8540SL).

Lock-ring tool for the Standard Lock and Slim Lock splined carriers (8540L / 8540SL).

Barrel adjusters for the 0° and 13° cable guides used with the internal gear mech.

0° cable guide with frame clamp – routes the shift cables along the chainstay on frames without...

13° cable guide for mounting on cantilever brake bosses with the internal gear mech.

Paper gasket kit for the axle ring, supplied with axle plate screws – for internal and external...

Replacement springs for the female bayonet connectors (8273).

Concertina tubes that protect the hub cables of the internal gear mech (2 pcs, incl. 4 cable ties).

Hub cable Easy Set for the internal gear mech – for Speedhubs from serial no. 25300.

Freewheel springs (2 pcs) – genuine Speedhub 500/14 spare part.

Bayonet shift cable connectors for the internal gear mech – 1 male + 1 female.

Bayonet shift cable connectors for the internal gear mech – 2 female.

Bayonet shift cable connectors for the internal gear mech – 2 male.

Hub cables for the internal gear mech, incl. tubes and zip ties.

Complete axle ring assembly for Speedhubs with internal gear mech (internal cable routing).