3X3 SHIFT E9.XP Electric Shift Actuator – for 3X3 NINE
The 3X3 SHIFT E9.XP is the electric actuator that shifts the 3X3 NINE gear hub. It is mounted on the hub and comes with all the screws it needs. It is also part of the Booda Bike Alpine 3x3.
3X3 SHIFT E9.XP at a glance
| Manufacturer | 3X3 (H+B Hightech GmbH), Adelmannsfelden, Germany |
|---|---|
| Manufacturer order number | 000314 |
| Name on the invoice | 3X3 SHIFT E9.XP – actuator for electronic shifting (eshift) |
| Fits | 3X3 NINE gear hub (the actuator sits on the right side of the hub) |
| Included | All relevant mounting screws |
| Not included | The cable for power supply and CAN bus communication (sold as a separate part) |
| Country of origin | Poland |
Frequently asked questions
Does the 3X3 SHIFT E9.XP actuator work on its own?
No. It is the actuator of the 3X3 E-Shift system and needs a 3X3 NINE hub and a trigger such as the 3X3 SHIFT E.TR.CMD, which we also sell. The cable for power supply and CAN bus communication is a separate part. Please refer to the 3X3 technical manual for system integration and compatibility.
Is the cable included with the actuator?
No. The actuator comes with its screws, but the cable for power supply and CAN bus communication is a separate part.
Where does the actuator go?
It is mounted on the right side of the 3X3 NINE hub, as shown in the picture above.
About 3X3
3X3 is a brand of H+B Hightech GmbH in Adelmannsfelden, Baden-Württemberg. According to the manufacturer, all 3X3 products are made in Germany and around 60% of the components are produced in-house.