Possible SpinnerOne – Rear Hub 24H StraightPull 142×12, CenterLock
Possible SpinnerOne straightpull rear hub with 24 spoke holes, made for single speed bikes with a Gates belt and a Rohloff belt line. Black aluminium hub body.
Why the SpinnerOne rear hub?
Made for belt drive. Ideal for a Gates rear sprocket with the Rohloff belt line on single speed bikes.
142×12 mm, 24 holes. Black aluminium straightpull hub with a 12 mm cap.
Centerlock rotor interface. 9-spline Shimano-standard freewheel; rotor and sprocket are not included.
9-spline freewheel side
The sprocket side uses the 9-spline Shimano-standard freewheel interface, so a Gates rear sprocket for the Rohloff belt line fits here. The sprocket is not included.
Straightpull flange
A straightpull hub takes the spokes straight into the flange. This one has 24 spoke holes and a 12 mm cap, at 142 mm O.L.D.
Key facts
| Position | Rear |
|---|---|
| Hub type | Straightpull, 12 mm cap |
| Spoke holes | 24 |
| Material | Aluminium |
| Colour | Black |
| O.L.D. | 142 mm (142×12) |
| Sprocket interface | 9-spline (Shimano standard) freewheel |
| Rotor interface | Centerlock |
| Not included | Sprocket and rotor |
Frequently asked questions
Are the sprocket and the rotor included?
No. The sprocket and the rotor are not included; they are shown for illustration purposes only.
What is this hub designed for?
It is ideal for a Gates rear sprocket with the Rohloff belt line on single speed bikes.
About Possible
Possible is Boodabike's own range of wheel components: rims, hubs, inner tubes and tubeless parts. The parts are used on Booda Bike bicycles and are also sold separately.