Rohloff Axle-plate Torx screws – 6 pcs.
The Rohloff Axle-plate Torx screws (8236) are a set of six TX20 countersunk screws that hold the axle plate on the Speedhub 500/14 – Rohloff recommends fitting new ones whenever the axle plate is changed.
Why new screws?
Recommended at every plate change. Rohloff lists these screws as recommended whenever the axle plate is changed.
Correct size. TX20 countersunk screws, tightened to 3 Nm as Rohloff specifies.
Six in the bag. Enough for a full axle plate swap, with a spare.
Who is it for?
- Riders changing the axle plate. For example from a standard plate to OEM2 or PM.
- Workshops. A standard consumable for Speedhub service.
Compatibility
| Rohloff part no. | 8236 |
|---|---|
| Contents | 6 Torx screws |
| Drive / torque | TX20, 3 Nm |
| Fits | Speedhub 500/14 axle plates, standard hub widths |
| XL/XXL hubs | Use 8236XL |
Frequently asked questions
Can I re-use the old screws?
Rohloff recommends new screws when changing the axle plate.
Do they fit XL and XXL hubs?
No. Rohloff lists a separate set, 8236XL, for XL/XXL hubs.
About Rohloff
Rohloff AG is a German manufacturer from the Kassel area, best known for the Speedhub 500/14 – a sealed 14-speed gear hub with evenly spaced gears. Rohloff sells every spare part as an individual item, so a Speedhub can be serviced and adapted to a new frame instead of being replaced.
BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and parts. We build Speedhub bikes with Gates belt drive ourselves – if you are unsure which part fits your hub or frame, ask us before ordering.