Ostoskori

Tuonnin ALV ja tullit

EU:n ulkopuolisissa tilauksissa näytetty hinta on netto, ilman Unkarin arvonlisäveroa.

Tuonnin arvonlisäveron (maasta riippuen ALV, GST tai kulutusvero) ja mahdolliset tullit perivät maasi viranomaiset tai kuljetusyhtiö paketin saapuessa. Summa riippuu maasi säännöistä ja tilauksen arvosta.

Emme peri näitä summia, eivätkä ne näy ostoskorissa. Tarkan summan saat paikalliselta tulliviranomaiselta tai kuljetusyhtiöltä.

Omat tuotteeni

Ostoskorisi on tyhjä.

Rohloff Gear 1 for shifting box

4.15 USD
Gear 1 of the Speedhub shifting box – genuine Rohloff spare part.
SKU: SG01
Varastossa
Kansainvälinen toimitus
14 päivän palautusoikeus
Elinikäinen tuki
Kolmen vuoden takuu

Rohloff Gear 1 for the shifting box (SG01) is the small shift gear that sits on the hexagon of the SPEEDHUB 500/14 shift shaft and meshes with the gears of the gear mech – a genuine spare that is easy to lose during gear mech service.

Rohloff gear 1 (SG01) held with tweezers on the shift shaft of a SPEEDHUB with the gear mech removed
Gear 1 on the SPEEDHUB shift shaft.

Why keep a spare gear 1?

  • Small part, big job. Without gear 1 the gear mech cannot pass any shift to the hub.
  • Genuine Rohloff part. Made to the exact tooth form of the gear mech housing gears.
  • Easy to lose. It is pulled off the shift shaft with tweezers when the gear mech is removed – a spare saves the job if it drops.
  • Also part of the transfer box. Rohloff includes gear 1 with the EX transfer box (8216); this is the single part.

Who is it for?

  • Home mechanics doing gear mech service. Have a spare ready before you start.
  • Workshops. A standard drawer part for SPEEDHUB service.

Compatibility

FitsRohloff SPEEDHUB 500/14 shift shaft, between hub and gear mech
OrientationNarrow collar towards the hub interior
MountingFits easily in only one hexagon position
TipA little grease in the gap between gear 1 and the gear mech housing

Frequently asked questions

Gear 1 does not slide on – what is wrong?

Rohloff notes that gear 1 slides onto the hexagon easily and without resistance in only one position. Turn the cable drum slightly left or right around the aligned position until it slips on.

Which way round does it go?

The narrow collar of gear 1 always points inwards, towards the hub.

Do I need it if I buy a new transfer box?

No, Rohloff includes gear 1 with the EX transfer box (8216).

About Rohloff

Rohloff AG designs and builds the SPEEDHUB 500/14 in Fuldatal, Germany: a 14-speed gear hub with a 526% gear range that has proven itself for more than 20 years on touring, tandem, cargo and e-bikes.

BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and genuine spare parts. Not sure which part fits your hub? Send us the serial number and a photo of your hub and we will check it for you.