Rohloff Pipe Clamps for Art. #8240
Rohloff Pipe Clamps for the torque arm block (8262, pair) fix the quick-release torque arm block (8240) of a CC SPEEDHUB 500/14 to the chainstay – the genuine replacement for corroded or lost clamps.
Why genuine clamps?
Secure torque arm. The clamps hold the torque arm block firmly on the chainstay so the axle cannot turn.
Simple to fit. Tightened with a slotted or Phillips screwdriver to 5 Nm, according to Rohloff.
Specified by Rohloff. The listed clamps for the 8240 torque arm block.
Pair pack. Two clamps – the full set for one torque arm block.
Why it matters
A loose torque support is one of the causes Rohloff names for damaged shift cables: if the axle can turn, the cables are overstretched. Check the clamps regularly.
Who is it for?
- Owners of CC (quick-release) SPEEDHUBs. With the standard long torque arm and quick-release block.
- Riders of older touring bikes. Clamps age – replace them before they slip.
Compatibility
| Fits | Rohloff torque arm quick-release block 8240 (CC quick-release axle) |
|---|---|
| Contents | 2 pipe clamps |
| Tool | Slotted or Phillips screwdriver |
| Torque | 5 Nm |
| TS axle versions | Use the torque arm clamp TS (8241) instead |
Frequently asked questions
Do I need these on a thru-axle (A12) hub?
No. A12, OEM, OEM2 and PM versions anchor the torque differently; these clamps are for the long torque arm with quick-release block.
How tight should they be?
Rohloff specifies 5 Nm for the two clamps.
About Rohloff
Rohloff AG designs and builds the SPEEDHUB 500/14 in Fuldatal, Germany: a 14-speed gear hub with a 526% gear range that has proven itself for more than 20 years on touring, tandem, cargo and e-bikes.
BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and genuine spare parts. Not sure which part fits your hub? Send us the serial number and a photo of your hub and we will check it for you.