Tuonnin ALV ja tullit

EU:n ulkopuolisissa tilauksissa näytetty hinta on netto, ilman Unkarin arvonlisäveroa.

Tuonnin arvonlisäveron (maasta riippuen ALV, GST tai kulutusvero) ja mahdolliset tullit perivät maasi viranomaiset tai kuljetusyhtiö paketin saapuessa. Summa riippuu maasi säännöistä ja tilauksen arvosta.

Emme peri näitä summia, eivätkä ne näy ostoskorissa. Tarkan summan saat paikalliselta tulliviranomaiselta tai kuljetusyhtiöltä.

Omat tuotteeni

Ostoskorisi on tyhjä.

Rohloff Torque Arm

28.26 USD
37.63 USD
Long torque arm for Speedhubs mounted with the standard axle plate.
SKU: 8230
Tilattavissa, ei varastossa
Kansainvälinen toimitus
14 päivän palautusoikeus
Elinikäinen tuki
Kolmen vuoden takuu

The Rohloff Torque Arm (8230) is the long aluminium torque arm for SPEEDHUB 500/14 hubs with the standard axle plate – it carries the hub torque to the chainstay on frames without a special dropout or brake mount.

Rohloff long torque arm 8230 in black aluminium
Rohloff Torque Arm 8230.

Why the long torque arm?

  • Fits almost any frame. The standard axle plate with long torque arm needs no special dropout – the classic way to fit a SPEEDHUB.
  • Many mounting positions. The row of holes lets you place the clamp where it suits your chainstay.
  • Bolts behind the axle plate. Rohloff specifies 7 Nm for the axle plate bolts (5 mm Allen key).
  • CC and TS versions. CC hubs fix the narrow end with a quick release; TS hubs with the torque arm clamp.
Rohloff torque arm 8230 seen from another angle

Wheel removal

Before removing the wheel, release the narrow end of the torque arm from the frame. With the quick release version on CC hubs this takes seconds.

Who is it for?

  • Riders fitting a SPEEDHUB to a standard frame. The torque arm needs no special dropouts.
  • Riders replacing a bent or lost arm. Genuine Rohloff replacement.

Compatibility

Rohloff part number8230
MaterialAluminium
Axle plateStandard CC/TS axle plate (versions not marked OEM or OEM2)
Frame fixingCC: quick release head and block; TS: torque arm clamp 8241
Axle plate bolt torque7 Nm

Frequently asked questions

Do I need it with an OEM or OEM2 axle plate?

No. OEM and OEM2 axle plates are anchored by the dropout or brake mount. The long torque arm is for the standard axle plate.

Which parts fix the arm to the frame?

On TS hubs the torque arm clamp 8241; on CC hubs the quick release block 8240 and head 8229. The screws 8231 fix it to the axle plate.

About Rohloff

Rohloff AG is a German engineering company based in Fuldatal near Kassel. Its SPEEDHUB 500/14 is a sealed 14-speed gear hub with evenly spaced gears, built for riders who want a drivetrain that keeps working for tens of thousands of kilometres with little more than an annual oil change.

BoodaBike in Budapest is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and spare parts. Every part we sell is genuine Rohloff, and we are happy to help you find the right part number for your hub.