Shimano OT-SP41 Shift Cable Housing – per 0.5 m
Shimano OT-SP41 is genuine 4 mm SIS-SP shift cable housing, pre-lubricated with silicone grease and cut from the workshop roll in 0.5 m steps. Fresh housing is the cheapest way to bring back light, precise shifting on Alfine and derailleur bikes.
Why OT-SP41?
SIS-SP housing. Shimano's standard 4 mm shift housing, used with Alfine shifters.
Pre-lubricated. Silicone grease inside for a light cable pull from day one.
Cut to length. Sold per 0.5 m – order exactly what your bike needs.
Genuine Shimano. Original Shimano housing, cut from Shimano's own workshop box.
Cut from the workshop box
We cut the housing from Shimano's workshop box in 0.5 m units. For example, a typical rear run on a trekking bike needs about 3 × 0.5 m.
Heavy or imprecise shifting on an Alfine bike is often worn or kinked housing – replace it before you replace the shifter.
Who is it for?
- Riders with heavy shifting. New housing often solves it.
- Home mechanics. Re-cabling a bike.
Specifications
| Model | Shimano OT-SP41 |
|---|---|
| Diameter | 4 mm |
| Type | SIS-SP shift housing |
| Lubrication | Silicone grease, pre-lubricated |
| Colour | Black |
| Sold per | 0.5 m |
| Compatible | Shimano SIS shifters, including Alfine |
Frequently asked questions
How much do I need?
Measure the old housing and round up to the next 0.5 m. Order one unit per 0.5 m.
Is it compatible with Alfine?
Yes – it is Shimano's standard SIS-SP housing used with Alfine shifters.
Can I use it for brakes?
No. Shift housing is not made for brake cables.
About Shimano
Shimano was founded in 1921 in Sakai, Japan, as a one-man workshop making freewheels. Today it is the world's largest maker of bicycle components, and its standards – Center Lock rotors, Hollowtech cranks, Rapidfire shifters, mineral-oil hydraulic brakes – are what most bikes are built around.
At BoodaBike we use Shimano internal gear hubs and hydraulic brakes on our own belt-drive bikes, and we stock the service parts we use in our own workshop.