Ostoskori

Tuonnin ALV ja tullit

EU:n ulkopuolisissa tilauksissa näytetty hinta on netto, ilman Unkarin arvonlisäveroa.

Tuonnin arvonlisäveron (maasta riippuen ALV, GST tai kulutusvero) ja mahdolliset tullit perivät maasi viranomaiset tai kuljetusyhtiö paketin saapuessa. Summa riippuu maasi säännöistä ja tilauksen arvosta.

Emme peri näitä summia, eivätkä ne näy ostoskorissa. Tarkan summan saat paikalliselta tulliviranomaiselta tai kuljetusyhtiöltä.

Omat tuotteeni

Ostoskorisi on tyhjä.

Shimano SM-BH90 Olive + Connector Insert

1.92 USD
One olive and one connector insert for a Shimano BH90 hose connection.
SKU: Y8JA98020
Tilattavissa, ei varastossa
Kansainvälinen toimitus
14 päivän palautusoikeus
Elinikäinen tuki
Kolmen vuoden takuu

The Shimano SM-BH90 olive + connector insert (Y8JA98020) seals a Shimano BH90 hydraulic hose at the brake lever. Every time the hose is shortened or replaced, the lever end needs a new pair – they are single-use parts.

Brass olive and steel connector insert for Shimano SM-BH90 hydraulic hoses
Y8JA98020: one olive and one connector insert.

Why keep a few in stock?

  • Tight seal. The olive compresses onto the hose and seals it; the insert supports the hose end from inside.
  • Single-use. Once compressed, an olive cannot seal again – a new pair is needed for every hose cut.
  • For BH90 hoses. Fits the SM-BH90 hose family used on Shimano's current disc brakes.
  • Genuine Shimano. Correct size and material for a leak-free connection.
Diagram of a Shimano hydraulic hose connection: connecting bolt, olive, connector insert and hose

How the connection works

1 – connecting bolt, screws into the brake lever; 2 – olive, compresses onto the hose and seals it; 3 – connector insert, pushed into the hose end; 4 – hydraulic hose.

The olive and the insert are single-use: fit new ones every time the hose is shortened.

Who is it for?

  • Anyone shortening a BH90 hose. For example after fitting new handlebars or a new frame.
  • Workshops. Setting up new bikes and brakes.

Compatibility

Part numberY8JA98020
In the box1 olive, 1 connector insert
Compatible hosesSM-BH90-SS, -SBM, -SB, -SBLS, -SBS, -JK-SS, -JK-SSR
Not forSM-BH59 hoses – use the Y8H598010 set

Frequently asked questions

Can I reuse an old olive?

No. Once compressed, the olive cannot seal again – always use a new one.

How many do I need?

One set per hose end at the lever, i.e. one per brake.

BH90 or BH59 – which do I have?

The hose type is printed on the hose. BH90 parts do not fit BH59 hoses and vice versa.

About Shimano

Shimano was founded in 1921 in Sakai, Japan, as a one-man workshop making freewheels. Today it is the world's largest maker of bicycle components, and its standards – Center Lock rotors, Hollowtech cranks, Rapidfire shifters, mineral-oil hydraulic brakes – are what most bikes are built around.

At BoodaBike we use Shimano internal gear hubs and hydraulic brakes on our own belt-drive bikes, and we stock the service parts we use in our own workshop.