Panier

TVA à l'importation et droits de douane

Pour les commandes hors UE, le prix affiché est HT, sans la TVA hongroise.

La TVA à l'importation (TVA, GST ou taxe à la consommation selon le pays) et les éventuels droits de douane sont perçus par les autorités de votre pays ou par le transporteur à l'arrivée du colis. Le montant dépend des règles de votre pays et de la valeur de la commande.

Nous ne percevons pas ces montants et ils n'apparaissent pas dans le panier. Votre bureau de douane local ou le transporteur peut vous indiquer le montant exact.

Mes produits

Votre panier est vide.

Possible SpinnerOne – StraightPull Hub Set 24H, SingleSpeed

120.14 USD
Black aluminium straightpull hub set, front 100×12 and rear 142×12, 24 spoke holes, 9-spline Shimano-standard freewheel and Centerlock rotor interface. Made for single speed bikes with a Gates belt and Rohloff belt line; sprocket and rotors not included.
SKU: PSSPH-K0003
En stock
Expédition internationale
Remboursement sous 14 jours
Assistance à vie
Garantie trois ans

Possible SpinnerOne straightpull hub set: front and rear hub with 24 spoke holes, made for single speed bikes with a Gates belt and a Rohloff belt line. Black aluminium hub bodies.

Possible SpinnerOne hub set, black straightpull front and rear hub, 24 holes
Possible SpinnerOne hub set – front and rear, straightpull, 24 holes.

Why the SpinnerOne hub set?

  • Made for belt drive. Ideal for a Gates rear sprocket with the Rohloff belt line on single speed bikes.
  • 100×12 front, 142×12 rear. Black aluminium straightpull hubs with 24 holes and a 12 mm cap.
  • Centerlock rotor interface. 9-spline Shimano-standard freewheel; rotors and sprocket are not included.
Possible SpinnerOne hub seen end-on, straightpull flange with Centerlock seat

Straightpull flanges

Both hubs are straightpull with 24 spoke holes and a 12 mm cap, at 100 mm (front) and 142 mm (rear) O.L.D.

Possible SpinnerOne rear hub, close-up of the freewheel end and Possible logo

9-spline freewheel at the rear

The rear hub takes a 9-spline Shimano-standard sprocket interface for a Gates sprocket with the Rohloff belt line. Sprocket and rotors are not included.

Possible SpinnerOne hub laced into a wheel, shown with a sprocket for illustration
Shown laced into a wheel with a sprocket for illustration – sprocket and rotors are not included.

Key facts

Hub typeStraightpull, 12 mm cap, front and rear
Spoke holes24
MaterialAluminium
ColourBlack
O.L.D.100 mm front (100×12), 142 mm rear (142×12)
Sprocket interface9-spline (Shimano standard) freewheel
Rotor interfaceCenterlock
Not includedSprocket and rotor

Frequently asked questions

Are the sprocket and the rotor included?

No. The sprocket and the rotor are not included; they are shown for illustration purposes only.

What is this hub set designed for?

It is ideal for a Gates rear sprocket with the Rohloff belt line on single speed bikes.

About Possible

Possible is Boodabike's own range of wheel components: rims, hubs, inner tubes and tubeless parts. The parts are used on Booda Bike bicycles and are also sold separately.

Contenu

Possible SpinnerOne – Front Hub 24H StraightPull 100x12, CenterLock1 pcs
Possible SpinnerOne – Rear Hub 24H StraightPull 142×12, CenterLock1 pcs