Rohloff Bolt and circlip for locating fork – long torque arm
The Rohloff Bolt and circlip for the locating fork (8707) is the replacement securing pin and circlip that hold the locating fork on the long torque arm of a Speedhub 500/14 CC.
Why replace them?
Holds the torque arm. The securing pin passes through the locating fork and torque arm; the circlip secures the other end. 
Safety-relevant. Rohloff stresses that both circlips must seat correctly. 
Small part, big job. A lost circlip is replaced without buying a new torque arm.
Where it sits
On CC hubs with a torque arm, the locating fork fits over the arm and the pin and circlip lock them together. TS versions use a torque arm clamp instead.
Who is it for?
- Riders with a CC torque arm. Replace a lost or bent pin or circlip.
- Touring riders. A light spare for the tool kit.
Compatibility
| Rohloff part no. | 8707 |
|---|---|
| Contents | Securing bolt and circlip (set) |
| Fits | Locating fork of the long torque arm |
| Hub | Speedhub 500/14 CC with torque arm |
Frequently asked questions
Does it fit the TS torque arm clamp?
No, TS versions use a clamp instead of the locating fork.
Can I ride without the circlip?
No. The circlip secures the pin – fit a new one before riding.
About Rohloff
Rohloff AG is a German manufacturer from the Kassel area, best known for the Speedhub 500/14 – a sealed 14-speed gear hub with evenly spaced gears. Rohloff sells every spare part as an individual item, so a Speedhub can be serviced and adapted to a new frame instead of being replaced.
BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and parts. We build Speedhub bikes with Gates belt drive ourselves – if you are unsure which part fits your hub or frame, ask us before ordering.