Import áfa és vám

Az EU-n kívüli rendeléseknél a megjelenített ár nettó, magyar áfa nélkül.

Az import áfát (országtól függően VAT, GST vagy fogyasztási adó) és az esetleges vámot a célország hatósága vagy a futárszolgálat számolja fel, amikor a csomag megérkezik. Mértékük az országod szabályaitól és a rendelés értékétől függ.

Ezeket az összegeket mi nem szedjük be, és a kosárban sem szerepelnek. Pontos összegről a helyi vámhatóság vagy a futárszolgálat tud tájékoztatni.

Termékeim (0)
A kosarad jelenleg üres.

Rohloff Distancing washers for Chain Tensioner – 6 units

2.20 EUR
2.93 EUR
Distancing washers for the Rohloff chain tensioner (6 pcs).
SKU: 8256
Raktáron van
Nemzetközi kiszállítás
14 napos visszafizetés
Örökös támogatás
Három év garancia

The Rohloff Distancing washers for Chain Tensioner (Art. 8256) are the spacers that set the lateral position of the Rohloff chain tensioner on the derailleur hanger, so the jockey wheels line up with the chain.

Rohloff distancing washers 8256 for the chain tensioner
Rohloff Distancing washers for Chain Tensioner, Art. 8256.

Why distancing washers?

  • Lateral adjustment. Rohloff uses spacers to line the tensioner up with your chainline.
  • Quieter drive. A tensioner in line with the sprocket keeps the chain running straight.
  • Easily lost. Small washers go missing during wheel or tensioner work – keep spares.
  • Chainline changes. Switching sprocket carrier or sprocket can shift the chainline; the tensioner position may need adjusting.
Rohloff distancing washers, second view

When to readjust

Rohloff notes that converting to a splined carrier may require the chain tensioner position to be adjusted. These washers are how you do it.

Rohloff distancing washers for the chain tensioner, detail

Genuine spacers

Original Rohloff spacers for the Rohloff chain tensioner, sold in Rohloff’s packing unit of 6 washers.

Who is it for?

  • Riders changing sprockets or carriers. Realign the tensioner after the change.
  • Anyone fitting a tensioner. Fine-tune the chainline at installation.
  • Workshops. A small stock part for SPEEDHUB service.

Compatibility

Rohloff part number8256
FitsRohloff chain tensioners
Pack6 washers (Rohloff packing unit)

Frequently asked questions

How many washers do I need?

It depends on your chainline; add or remove washers until the jockey wheels line up with the sprocket.

Do I need them after a splined carrier conversion?

Rohloff says to check and adjust the tensioner position if necessary.

Which bolt do I need with extra washers?

On thin dropouts or with splined sprockets, the long bolt 8255 may be needed.

About Rohloff

Rohloff AG from Fuldatal near Kassel, Germany, builds the SPEEDHUB 500/14: a 14-speed gear hub with evenly spaced gears, a 526% gear range and a sealed oil bath. As robust as the hub is, Rohloff sells small wear and replacement parts individually, so a SPEEDHUB is repaired, not replaced.

BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and parts. We sell genuine Rohloff parts and we are happy to help you identify the right one for your hub version.