Import áfa és vám

Az EU-n kívüli rendeléseknél a megjelenített ár nettó, magyar áfa nélkül.

Az import áfát (országtól függően VAT, GST vagy fogyasztási adó) és az esetleges vámot a célország hatósága vagy a futárszolgálat számolja fel, amikor a csomag megérkezik. Mértékük az országod szabályaitól és a rendelés értékétől függ.

Ezeket az összegeket mi nem szedjük be, és a kosárban sem szerepelnek. Pontos összegről a helyi vámhatóság vagy a futárszolgálat tud tájékoztatni.

Termékeim (0)
A kosarad jelenleg üres.

Rohloff Hub cable Easy Set – from Serial no. 25300

31.54 EUR
42.00 EUR
Hub cable Easy Set for the internal gear mech – for Speedhubs from serial no. 25300.
SKU: 8573
Raktáron van
Nemzetközi kiszállítás
14 napos visszafizetés
Örökös támogatás
Három év garancia

The Rohloff Hub Cable Easy Set (8573) is a fully pre-assembled pair of shift cables with bayonets and bellows for SPEEDHUB 500/14 hubs with internal gear mech and the quick-change axle ring (from serial no. 25300) – the fastest way to replace worn or broken hub cables.

Rohloff Hub cable Easy Set with bellows, bayonet ends and cable pulley
Rohloff 8573 Hub cable Easy Set.

Why the Easy Set?

  • Pre-assembled. Cables, bayonets and bellows come ready to fit into the axle ring – no cutting to length.
  • Quick-change axle ring. On hubs from serial 25300 the axle ring stays on the axle during a cable change.
  • Fresh, precise shifting. Rohloff gives the 0.9 mm special shift cable a life of about 8,000–10,000 km when correctly installed.
  • For the road. A compact spare to carry on long tours with an internal-gear-mech hub.

Who is it for?

  • Tourers with an internal gear mech hub. A worn cable is replaced quickly, even away from home.
  • Workshops. Saves cutting and assembling the cable ends by hand.

Compatibility

FitsSPEEDHUB 500/14 with internal gear mech and quick-change axle ring
Serial numbersFrom 25300 (models from early 2003)
How to recogniseAxle plate held by 5 screws
Cable0.9 mm Rohloff special shift cable
Axle plate screwsM4x25, Torx TX20, 3 Nm

Frequently asked questions

How do I know if my hub has the quick-change axle ring?

Count the axle plate screws: 5 screws = quick-change axle ring (use this Easy Set). 6 screws = older one-piece axle ring (use the hub cable set 8271).

My cable broke well before 8,000 km – why?

Rohloff names three common causes: a wrongly positioned axle plate or cable stop making the cable run at a kink, a loose torque support letting the axle turn, or mechanical damage such as a fall.

Can I fit it myself?

Yes, with care: the wheel comes out, the bellows and bayonets are removed and the axle plate is taken off. Note the axle plate position before you remove it.

About Rohloff

Rohloff AG designs and builds the SPEEDHUB 500/14 in Fuldatal, Germany: a 14-speed gear hub with a 526% gear range that has proven itself for more than 20 years on touring, tandem, cargo and e-bikes.

BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and genuine spare parts. Not sure which part fits your hub? Send us the serial number and a photo of your hub and we will check it for you.