Import áfa és vám

Az EU-n kívüli rendeléseknél a megjelenített ár nettó, magyar áfa nélkül.

Az import áfát (országtól függően VAT, GST vagy fogyasztási adó) és az esetleges vámot a célország hatósága vagy a futárszolgálat számolja fel, amikor a csomag megérkezik. Mértékük az országod szabályaitól és a rendelés értékétől függ.

Ezeket az összegeket mi nem szedjük be, és a kosárban sem szerepelnek. Pontos összegről a helyi vámhatóság vagy a futárszolgálat tud tájékoztatni.

Termékeim (0)
A kosarad jelenleg üres.

Rohloff Hub cables for Internal gear mech incl. tubes and zip-ties

4.11 EUR
5.48 EUR
Hub cables for the internal gear mech, incl. tubes and zip ties.
SKU: 8271
Raktáron van
Nemzetközi kiszállítás
14 napos visszafizetés
Örökös támogatás
Három év garancia

The Rohloff Hub Cables for internal gear mech (8271), with tubes and zip ties, are the repair set for older SPEEDHUB 500/14 hubs with the one-piece axle ring and pressed-in cable guides (up to serial no. 25300).

Rohloff hub cable repair set with cables, bellows, gaskets, zip ties and cable ends
Rohloff 8271 hub cable repair set.

Why this repair set?

  • Made for early hubs. On hubs with the one-piece axle ring, the axle ring and cable pulley have to come off to change the cables – this set is meant for that job.
  • Small parts included. Supplied with tubes and zip ties; Rohloff’s parts list also includes the axle-ring gasket kit (8714).
  • Restores clean shifting. New 0.9 mm Rohloff special shift cables bring back precise gear steps.
  • Keeps an older hub running. A SPEEDHUB built before 2003 can stay in service for many more kilometres.

Who is it for?

  • Owners of early SPEEDHUBs. Hubs built until early 2003 with internal gear mech.
  • Rohloff workshops. The repair set for one-piece axle rings.

Compatibility

FitsSPEEDHUB 500/14 with internal gear mech and one-piece axle ring
Serial numbersUp to 25300 (built until early 2003)
How to recogniseAxle plate held by 6 screws; cable guides pressed into the axle ring
ContentsHub cables, tubes, zip ties (as pictured)
Cable cutting165 mm from the top of the cable guide (brass tube 8711 helps)

Frequently asked questions

8271 or 8573 – which do I need?

Count the axle plate screws. 6 screws = one-piece axle ring, use this set (8271). 5 screws = quick-change axle ring, use the Easy Set (8573).

Is this a job for a workshop?

On one-piece axle rings the axle ring with cable pulley has to be removed, which is more involved than on later hubs. Our Rohloff-trained workshop can do it if you prefer.

About Rohloff

Rohloff AG designs and builds the SPEEDHUB 500/14 in Fuldatal, Germany: a 14-speed gear hub with a 526% gear range that has proven itself for more than 20 years on touring, tandem, cargo and e-bikes.

BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and genuine spare parts. Not sure which part fits your hub? Send us the serial number and a photo of your hub and we will check it for you.