Termékeink

Üregvédő spray belső korrózióvédelem kialakításához.

Mounting bolts (4 pcs) for Rohloff 4-hole Speedhub brake rotors.

Complete Speedhub 500/14 service kit (version 2018) with replacement parts and tools for a full...

Brass measuring aids (165 mm and 200 mm) for setting the correct shift cable length.

XXL sprocket remover for CC 190 mm and A12 197 mm Speedhubs, incl. A12 adapter and bolt.

Sprocket remover for 135/142/170/177 mm Speedhubs, incl. A12 adapter and bolt.

Gauge for trimming the shifter cables of the internal gear mech to the correct length, whatever...

50 ml syringe for filling and draining Speedhub oil.

TX20 Torx T-handle key for Rohloff Speedhub maintenance.

Oil filling tube with threaded connector for Speedhub oil changes.

Rohloff Speedhub toolkit: sprocket remover, TX20 key, oil change kit, cable measuring aids and...

Washer for the A12 thru-axle mounting hardware of the Speedhub 500/14.

Right-hand threaded A12 reduction sleeve, M12×1.5 – for DT Swiss / Maxle thru-axle frames.

Right-hand threaded A12 reduction sleeve, M12×1 – for Syntace X-12 V2 frames.

Right-hand A12 spacer for Shimano E-Thru dropouts.

Left-hand A12 spacer for Shimano E-Thru dropouts.

Right-hand A12 reduction sleeve for Syntace X-12 (V1) dropouts.

Left-hand conical A12 spacer for Syntace X-12 (V1) dropouts.

Right-hand threaded A12 reduction sleeve, M12×1.75 – for DT Swiss / Maxle thru-axle frames.

Left-hand A12 reduction sleeve for DT/Maxle, Syntace V1/V2 and Shimano E-Thru dropouts.

Replacement Nord-Lock® safety washers (4 pcs) for the A12 thru-axle bolts.

A12 axle bolt set with Nord-Lock® washers (2 bolts, 4 washers) for thru-axle Speedhub 500/14 hubs.

M6 support bolt with nut and washer for the OEM2 axle plate.

M5 adapter for mounting a fender or rack bolt on the OEM2 axle plate.

TS axle nuts M10×1 with washers (2 pcs) for threaded-axle Speedhubs.

Jubilee clips that fix the quick-release torque arm to the chainstay (CC versions).

Torque arm clamp for TS hubs – fits chainstays up to 25 mm diameter.

Quick-release block for the CC torque arm.

Torx screws (6 pcs) that fix the axle plate to the Speedhub 500/14.

Screws with washers for the Speedhub torque arm.

Long torque arm for Speedhubs mounted with the standard axle plate.

Quick-release head (clevis) for the CC torque arm.

Bolt and circlip for the locating fork of the long torque arm (CC versions).