Drivlina

Gates Tensioner Idler Wheel: a replacement idler for a Gates belt tensioner, supplied without nut...

Gates Snubber Spacer Kit: lets all Gates snubbers be used with 142 mm installation widths and more.

Gates Snubber Screw, stainless steel, M10×1×12: a single screw for attaching an RDM snubber to...

Gates RDM Snubber including snubber screw: keeps the belt securely on the sprocket and prevents...

Gates Carbon Drive CDC belt, black: the balance of performance and value for daily commuting and...

Gates Carbon Drive CDX front sprocket, 4-bolt, 104 mm BCD: black hard-anodised aluminium for...

Gates Carbon Drive CDX front sprocket, 5-bolt, 130 mm BCD: black hard-anodised aluminium for...

Gates Carbon Drive CDX Pinion front sprocket: stainless steel, for Pinion P- and C-line gearboxes...

Gates Carbon Drive CDX:Black rear sprocket for the Rohloff Speedhub. 19, 20 and 22 teeth.

Gates Carbon Drive CDC rear sprocket for thread-on freewheel hubs. 22 teeth.

Gates Carbon Drive CDC rear sprocket for Shimano Alfine and Nexus internal gear hubs. 22 and 24...

Gates Carbon Drive CDX rear sprocket for Shimano Alfine and Nexus internal gear hubs. 22, 24, 26...

Gates Carbon Drive CDX rear sprocket for Shimano 9-spline cassette hubs. 19, 20, 21, 22, 23, 24,...

Gates Sonic Tension Meter 550C: a sonic belt tension meter that shows the load and tension of...

Gates Sonic Tension Meter 350C: a sonic belt tension meter that analyses the sound of the belt...

Smidda direct-mount-vevarmar i aluminiumlegering för 24 mm MegaExo – den rena basen för ett bygge...

Possible SpinnerOne cassette lockring, a spare part for the Possible SpinnerOne range. Part of...

Gates Strap Wrench: a tool for removing 9-spline and Bosch sprockets simply and efficiently.

Gates Locknut Tool for the S550 sprocket lockring: for assembly and disassembly of the sprocket...

Vågfjäderbricka och plastdistans i ett set för tysta, spelfria FSA MegaExo 24 mm-vevar.

Tät vevlagerenhet med utvändiga lager för FSA 24 mm MegaExo-vevar i ramar med BSA-gänga,...

Gates Spring Tension Tester: a 550 mm gauge for checking the tension of any Gates Carbon Drive...

Gates Belt Care Silicone Spray, 150 ml: seals and preserves your Gates Carbon Drive; water beads...

Gates Carbon Drive CDX rear sprocket for the Rohloff Speedhub.

Gates Carbon Drive CDX rear sprocket for the Rohloff Speedhub.

Gates Carbon Drive CDX rear sprocket for the Rohloff Speedhub.

Gates Carbon Drive CDX crank set, FSA Comet direct mount, Alfine beltline: 170 mm arms with a CDX...

Gates Carbon Drive CDX crank set, FSA Comet direct mount, Rohloff beltline: 170 mm arms with a...