Cart

Import VAT and duties

For orders outside the EU, the price shown is net, without Hungarian VAT.

Import VAT (VAT, GST or consumption tax, depending on the country) and any customs duty are charged by your country's authorities or the courier when the parcel arrives. The amount depends on your country's rules and the value of the order.

We do not collect these amounts and they do not appear in the cart. Your local customs authority or the courier can give you the exact figure.

My products

Your cart is currently empty.

-25%

Rohloff A12 Reduction Sleeve – right-hand, M12x1.75 Threaded - 8593

4.09 USD
5.45 USD
Right-hand threaded A12 reduction sleeve, M12×1.75 – for DT Swiss / Maxle thru-axle frames.
SKU: 8593
Sold out
International Shipping
14-day refund
Lifetime support
Three years warranty

The Rohloff A12 Reduction Sleeve, right-hand, M12x1.75 threaded (8593) is the sprocket-side sleeve for DT Swiss / Maxle thru-axle frames with M12x1.75 thread, adapting them to the 7 mm axle bolt of the Speedhub 500/14 A12.

Rohloff A12 threaded reduction sleeve M12x1.75, part 8593
Rohloff 8593 – right-hand threaded A12 sleeve, M12x1.75.

How to order

This part cannot be ordered on its own. The A12 reduction sleeves are sold only as part of the Rohloff A12 Full set – Based on measurements. To get one, order that set and then contact us through the contact form in our Help Center. We arrange the measurement of your frame with you, and we explain everything by email.

Why the original sleeve?

  • 12 mm to 7 mm. A12 reduction sleeves reduce the 12 mm thru-axle opening to 7 mm for the M7x1 Rohloff axle bolts.
  • Coarse-thread version. For frames whose sprocket-side dropout has the coarser M12x1.75 thread; tightened with a 13 mm spanner to 10 Nm.
  • Measured, not guessed. Rohloff states that 12 mm thru-axle frames must be measured with the A12 dropout measurement kit (Art. 8600) to work out which reduction sleeves and spacers are needed.

Who is it for?

  • DT Swiss / Maxle frames with M12x1.75 thread. The sprocket-side sleeve for an A12 Speedhub.
  • Workshops fitting A12 hubs. Keep the correct pitch at hand for Maxle-type frames.

Compatibility

Rohloff part no.8593
SideRight (sprocket side)
Dropout systemDT Swiss / Maxle thru-axle frames with M12x1.75 thread
ThreadM12x1.75
HubSpeedhub 500/14 A12 (12 mm thru axle)
FunctionReduces the 12 mm dropout to 7 mm for the M7 axle bolt

Frequently asked questions

Can I use the M12x1.5 sleeve instead?

No. The sleeve must match the frame thread exactly; M12x1.75 and M12x1.5 are not interchangeable.

Do I need a sleeve on the left side too?

Yes – on DT/Maxle frames the left side uses the reduction sleeve 8592.

Can I order this part on its own?

No. It is available only as part of the Rohloff A12 Full set – Based on measurements. Order the set, then contact us through the contact form in our Help Center, and we will arrange the frame measurement and tell you everything by email.

About Rohloff

Rohloff AG is a German manufacturer from the Kassel area, best known for the Speedhub 500/14 – a sealed 14-speed gear hub with evenly spaced gears. Rohloff sells every spare part as an individual item, so a Speedhub can be serviced and adapted to a new frame instead of being replaced.

BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and parts. We build Speedhub bikes with Gates belt drive ourselves – if you are unsure which part fits your hub or frame, ask us before ordering.