Kosár

Import áfa és vám

Az EU-n kívüli rendeléseknél a megjelenített ár nettó, magyar áfa nélkül.

Az import áfát (országtól függően VAT, GST vagy fogyasztási adó) és az esetleges vámot a célország hatósága vagy a futárszolgálat számolja fel, amikor a csomag megérkezik. Mértékük az országod szabályaitól és a rendelés értékétől függ.

Ezeket az összegeket mi nem szedjük be, és a kosárban sem szerepelnek. Pontos összegről a helyi vámhatóság vagy a futárszolgálat tud tájékoztatni.

Termékeim (0)
A kosarad jelenleg üres.

FSA MegaExo Wave Washer + Spacer Set – 24 mm

4.93 EUR
Wave spring washer and plastic spacer in one set for quiet, play-free FSA MegaExo 24 mm cranks.
SKU: FSSMP-40000
Raktáron van
Kosárba teszemKosárba teszem
Nemzetközi kiszállítás
14 napos visszafizetés
Örökös támogatás
Három év garancia

The FSA MegaExo Wave Washer + Spacer Set for 24 mm spindles contains one wave spring washer and one plastic spacer – the two small parts on the non-drive side of an FSA MegaExo crank that take up side play and keep the left arm quiet and smooth.

FSA wave spring washer and plastic spacer set for MegaExo 24 mm
FSA MegaExo wave washer + spacer set – 24 mm.

Why buy the set?

  • Both parts at once. No need to work out which of the two is worn.
  • The easy fix for a knocking crank. Fresh washer and spacer take up side play again.
  • Made for a bottom bracket change. The FSA MegaExo BB-7100 does not include the wave washer.
  • Original FSA parts. The same parts we use when we build and service our Booda Bikes.
FSA wave spring washer and plastic spacer next to each other

What is in the set

One wave spring washer and one plastic spacer for 24 mm MegaExo spindles. Together they set the spacing between the non-drive-side bottom bracket cup and the left crank arm and gently preload the bearings.

FSA MegaExo crank and bottom bracket assembly with numbered parts; the wave washer is part 2 and the plastic spacer is part 3

Where do the parts go?

The wave washer is part 2 and the plastic spacer part 3, both on the non-drive side of the spindle.

1 – bottom bracket (two bearing cups threaded into the frame), 2 – wave spring washer, 3 – plastic spacer, 4 – left crank arm, 5 – crank bolt, 6 – drive-side crank arm with the 24 mm spindle, 7 – chainring or belt sprocket (direct mount).

Who is it for?

  • Riders with a clicking FSA crank. The cheapest first step before replacing bigger parts.
  • Anyone fitting a new BB-7100. Fresh small parts with the new bearings.
  • Booda Bike owners. Original spares for the FSA Comet crank on our bikes.

Specifications

SystemFSA MegaExo
Spindle24 mm
FitsFSA MegaExo 24 mm cranks and bottom brackets, e.g. Comet + BB-7100
In the box1 wave spring washer, 1 plastic spacer

Frequently asked questions

Does the FSA wave washer + spacer set fit the Comet crank and the BB-7100?

Yes. Both use the MegaExo 24 mm spindle.

Does it fit 30 mm spindles?

No. It is made for 24 mm MegaExo spindles.

How do I fit it?

Clean the spindle and the face of the non-drive-side cup, place the wave washer and the spacer on the spindle, fit the left arm, tighten the crank bolt to FSA's torque value and check that the crank turns freely without side play.

We build and service belt-drive and gear-hub bikes every day in our Budapest workshop. Not sure which part you need? Send us a photo of your crank and bottom bracket and we will tell you what fits.

About FSA

FSA – Full Speed Ahead – has made bicycle components since 1993 and moved into cranksets and chainrings in 1995. FSA introduced the compact road crankset in 2004, and its MegaExo system with external bearings and a 24 mm spindle is one of the most widely used crank and bottom bracket platforms on mountain, gravel, trekking and urban bikes. FSA parts are fitted as original equipment by many bike brands, including our own Booda Bike belt-drive bikes.

Mit tartalmaz

FSA MegaExo Wave Spring Washer – 24 mm1 db
FSA MegaExo Plastic Crank Spacer – 24 mm1 db