Import áfa és vám

Az EU-n kívüli rendeléseknél a megjelenített ár nettó, magyar áfa nélkül.

Az import áfát (országtól függően VAT, GST vagy fogyasztási adó) és az esetleges vámot a célország hatósága vagy a futárszolgálat számolja fel, amikor a csomag megérkezik. Mértékük az országod szabályaitól és a rendelés értékétől függ.

Ezeket az összegeket mi nem szedjük be, és a kosárban sem szerepelnek. Pontos összegről a helyi vámhatóság vagy a futárszolgálat tud tájékoztatni.

Termékeim (0)
A kosarad jelenleg üres.

Rohloff Axleplate A12 OEM2 – 142/148/177 mm

34.85 EUR
46.39 EUR
A12 OEM2 axle plate – anchors the Speedhub torque via a support bolt or IS2000 adapter on thru-axle frames.
SKU: 8559
Raktáron van
Nemzetközi kiszállítás
14 napos visszafizetés
Örökös támogatás
Három év garancia

The Rohloff Axleplate A12 OEM2 (8559) anchors the torque of a thru-axle Speedhub 500/14 A12 to the rearmost IS2000 brake-mount hole – via a support bolt, Speedbone or Monkey Bone – on 142, 148 and 177 mm frames.

Rohloff A12 OEM2 axle plate 8559 for 142/148/177 mm
Rohloff 8559 – A12 OEM2 axle plate.

Why the A12 OEM2 plate?

  • Uses the IS brake mount. Its seat wraps around a support bolt, Speedbone or Monkey Bone peg in the IS mount – no torque arm needed.
  • Flexible position. On A12 hubs the position of the anchoring point relative to the axle does not matter, as Rohloff notes.
  • Three widths. Fits A12 hubs with 142, 148 or 177 mm O.L.D.
  • Frame approval. Rohloff states the frame manufacturer must approve this anchoring method; otherwise use is at the rider's own risk.

Who is it for?

  • Thru-axle frames with IS disc mount. The standard torque solution for A12 hubs on IS frames.
  • Riders adding a Speedbone or Monkey Bone. The plate those parts work with.

Compatibility

Rohloff part no.8559
HubSpeedhub 500/14 A12, 142/148/177 mm O.L.D.
Brake mountIS2000 (international standard)
AnchoringSupport bolt (8560), Speedbone (8550) or Monkey Bone
ScrewsTX20, 3 Nm

Frequently asked questions

Can I use it on a Postmount frame?

For Postmount, Rohloff uses the A12 PM axle plate with a PM Bone (8558 + 8555).

What if the brake mount is on the chainstay?

Rohloff states OEM2 cannot be used on frames whose IS or PM mount sits on the chainstay with vertical dropouts – ask us for an alternative.

About Rohloff

Rohloff AG is a German manufacturer from the Kassel area, best known for the Speedhub 500/14 – a sealed 14-speed gear hub with evenly spaced gears. Rohloff sells every spare part as an individual item, so a Speedhub can be serviced and adapted to a new frame instead of being replaced.

BoodaBike (Massive Bikes, Budapest) is an official Rohloff service centre, trained by Rohloff, and an official European distributor of Rohloff hubs and parts. We build Speedhub bikes with Gates belt drive ourselves – if you are unsure which part fits your hub or frame, ask us before ordering.