Gear hub components

TS OEM axle plate for threaded-axle Speedhubs in frames with reinforced, elongated dropouts.

CC OEM axle plate for frames with reinforced, elongated vertical dropouts – no torque arm needed.

Long version of the standard TS axle plate for threaded-axle Speedhubs.

Standard TS axle plate for threaded-axle Speedhub hubs used with a torque arm.

Standard CC axle plate for quick-release Speedhub hubs used with a torque arm.

Oil drain screws with new seals for the Speedhub 500/14 – workshop pack of 10.

The oil drain screw of the SPEEDHUB 500/14 with a fresh seal – the small part you replace at an...

Single-service Speedhub oil set: 25 ml cleaning oil (in a 50 ml bottle), 12.5 ml SPEEDHUB OIL...

Rohloff all-season oil for the Speedhub 500/14 – 125 ml, with 10 oil drain screws (8205).

Rohloff SPEEDHUB OIL all-season gear oil, 125 ml – enough for 10 oil changes at Rohloff's fill...

Workshop Speedhub oil set in bottles (1 L cleaning oil + 500 ml all-season oil) with 40 oil drain...

Chainring spacers (5 pcs) for setting the correct chainline with a Speedhub.

The small retaining set (washer and circlip) for the Rohloff chain tensioner – replace it when...

Replacement torsion spring for Rohloff chain tensioners built with the modified spring introduced...

Long mounting bolt with distancing washers for the Rohloff chain tensioner.

Spacers that set the lateral position of the Rohloff chain tensioner on the derailleur hanger, so...

3.5 mm longer than the standard bolt: for the Rohloff chain tensioner on dropouts thinner than 7...

The black mounting plate with brass bushing of the Rohloff chain tensioner – the replacement for...

The standard bolt that fixes the Rohloff chain tensioner to the frame's derailleur hanger....

Replacement jockey wheels for the Rohloff chain tensioner (1 pair).

Replacement arm for the Rohloff Chain Tensioner 8250, 8250-10 and 8250-15 – fix a bent or damaged...

Conversion kit that brings Rohloff chain tensioners built before the end of 2002 up to the...

Replacement arm for the Rohloff DH Chain Tensioner Shorty (8245 and 8245-10) – swap just the arm...

Chain tensioner with 15 mm offset for XXL 190/197 mm Speedhubs.

Chain tensioner with 10 mm offset for XXL 190/197 mm Speedhubs (fatbikes), other gear hubs and...

Rohloff chain tensioner for Speedhubs in frames with vertical dropouts.

DH chain tensioner Shorty with 10 mm offset for XXL 190/197 mm Speedhubs.

Short DH chain tensioner (Shorty) for Speedhubs – for downhill and single-chainring setups.

Front chain guide for the chainring – stops the chain jumping off in rough terrain; adjustable...

Slim Lock splined carrier – only for sprockets with 15 teeth or more and Carbon Drive belt...

Standard splined carrier with lock ring – required for Gates Carbon Drive belt sprockets.

Slim splined carrier with snap ring – for frames where the standard chainline is not possible.

Standard splined carrier with snap ring – mounts Rohloff splined sprockets on the Speedhub.