Osat

The Sapim Polyax Double Square is a 16 mm, 14G spoke nipple made of black anodised 7075-T6...

Jagwire LEX 4 mm shift housing in black, sold by the metre. Linear steel strands around a...

Original FSA bolt that fixes the left crank arm on the 24 mm MegaExo spindle.

Front and rear HD-R290 hydraulic flat-mount disc brakes as a pair.

The Sapim HM nipple washer sits between the spoke nipple and a double-wall rim without eyelets....

TRP two-piece centerlock rotor with alloy spider, 160 mm, 1.8 mm thick.

One olive and one connector insert for a Shimano BH90 hose connection.

Tektro centerlock brake rotor, 1.8 mm thick, stainless braking surface.

Rohloff 4-hole Speedhub brake rotor, 2.0 mm thick – for Magura disc brakes.

Rohloff 4-hole Speedhub brake rotor, 1.8 mm thick – for Shimano, Hayes and similar disc brakes.

Rohloff 4-hole Speedhub brake rotor, 2.3 mm thick – for heavy-duty and e-bike use.

Rohloff 4-hole ABS brake rotor, 2.0 mm thick – for e-bikes with Bosch ABS.

Gates Carbon Drive CDX Direct Mount front sprocket for the Rohloff beltline: mounts directly on a...

Gates Carbon Drive CDX Direct Mount front sprocket for the Alfine beltline: mounts directly on a...

Single black A12 axle bolt for Boost (148 mm) thru-axle Speedhub installations.

E-14 diagnostic kit for BES3 – cross-exchange fault finding, with 1000 mm connection cable.

Extension cable between the E-14 DC/DC-CAN converter and the shifter unit – choose the length.

E-14 2.0 shifter unit for e-bikes with the Bosch Smart System (BES3).

E-14 1.0 shifter unit for e-bikes with Bosch BES2 or Panasonic FIT1 (E-14 generation up to the...

E-14 DC-CAN Adapter 2 – connects the E-14 shifter unit to the e-bike system.

Replacement clamp with Torx screws for the E-14 trigger shifter.

E-14 DC/DC-CAN converter that powers and controls the E-14 shifter unit.

Ergonomic trigger-style handlebar control for electronic Rohloff E-14 shifting: shift up with the...

E-14 switch unit – handlebar control for electronic Speedhub shifting.

Dropout measurement kit to configure the correct A12 mounting hardware for a thru-axle Speedhub...

Gear 1 of the Speedhub shifting box – genuine Rohloff spare part.

Spring, ball and lock washer set for the Revolver 3 chain tool.

Genuine Rohloff replacement knurled nut for the Revolver 3 chain riveting tool. Easy to grip by...

Genuine Rohloff replacement breech for the Revolver 3 chain riveting tool – the spare part that...

Genuine Rohloff replacement body for the Revolver 3 chain riveting tool – lets you rebuild a...

Spindle 3 with Campagnolo rivet pin for the Revolver 3 chain tool.

Spindle 3 with standard rivet pin for the Revolver 3 chain tool.

Revolver 3 universal chain riveting tool – precise riveting with interchangeable spindles.