Brake system

One pair of Tektro E10.11 brake pads (2 pcs) with return spring for the Tektro MD-C550 mechanical...

Pre-bled front and rear brake kit: Deore XT trekking levers and 2-piston flat-mount calipers.

TRP Hywave right lever with shift button and rear caliper, left TRP Hylex lever with front...

Right TRP Hywire brake-shift lever and left TRP Hylex brake lever with front and rear flat-mount...

Original black TRP lever hoods for Hylex II, Hywire and Vistar drop-bar levers, sold as a pair.

TRP connector cable linking a Hywire brake-shift lever to a Pinion gearbox or a Rohloff E-14, for...

One Tektro MD-C550 cable-actuated, dual-piston flat-mount caliper for road levers – fits front or...

Front and rear TRP Hylex hydraulic flat-mount disc brakes as a pair.

One-piece 6-bolt rotor, 160 mm × 1.8 mm, for the 3X3 gear hub and TRP Hywave.

One pair of brake pads (2 pcs) with return spring for the hydraulic Tektro HD-R290 and HD-R310...

Genuine Shimano BH90 disc brake hose cut from the roll – sold per 0.5 m.

Front and rear HD-R290 hydraulic flat-mount disc brakes as a pair.

TRP two-piece centerlock rotor with alloy spider, 160 mm, 1.8 mm thick.

Tektro centerlock brake rotor, 1.8 mm thick, stainless braking surface.

Rohloff 4-hole Speedhub brake rotor, 2.0 mm thick – for Magura disc brakes.

Rohloff 4-hole Speedhub brake rotor, 1.8 mm thick – for Shimano, Hayes and similar disc brakes.

Rohloff 4-hole Speedhub brake rotor, 2.3 mm thick – for heavy-duty and e-bike use.

Rohloff 4-hole ABS brake rotor, 2.0 mm thick – for e-bikes with Bosch ABS.

Petrol-coloured sensor magnet for 2.3 mm Rohloff Speedhub brake rotors – it sits in a cavity of...

Grey sensor magnet for 1.8 mm Rohloff Speedhub brake rotors – it sits in a cavity of the rotor...

Black sensor magnet for 2.0 mm Rohloff Speedhub brake rotors – it sits in a cavity of the rotor...

Flat-mount front brake adapter that connects a flat-mount caliper to a flat-mount fork and works...

Flat-mount rear brake adapter that lets a flat-mount caliper run a 160 mm rotor instead of 140 mm...

Possible 160 mm disc brake rotor with the four-hole Rohloff mount, made for Rohloff SPEEDHUB...

Possible 160 mm disc brake rotor for hubs with the Centerlock disc interface, with a silver...

Possible adapter that lets you fit a 6-bolt disc rotor to a hub with a Centerlock interface. Only...

Integrated drop bar shift and brake levers that let you run a Shimano Alfine 8 hub on a drop bar...

Pre-bled front and rear GRX dual-control levers with flat-mount calipers – a complete 2×12...

Integrated drop bar shift and brake levers that let you run a Shimano Alfine 11 hub on a drop bar...

Mounting bolts (4 pcs) for Rohloff 4-hole Speedhub brake rotors.