Tuotteemme

Rohloff Speedhub toolkit: sprocket remover, TX20 key, oil change kit, cable measuring aids and...

Washer for the A12 thru-axle mounting hardware of the Speedhub 500/14.

Right-hand threaded A12 reduction sleeve, M12×1.5 – for DT Swiss / Maxle thru-axle frames.

Right-hand threaded A12 reduction sleeve, M12×1 – for Syntace X-12 V2 frames.

Right-hand A12 spacer for the sprocket side of Shimano E-Thru 12 mm dropouts, used with the 8592...

Left-hand A12 spacer for the disc brake side of Shimano E-Thru 12 mm dropouts, used together with...

Right-hand A12 reduction sleeve for Syntace X-12 (V1) dropouts.

Left-hand conical A12 spacer for Syntace X-12 (V1) dropouts.

Right-hand threaded A12 reduction sleeve, M12×1.75 – for DT Swiss / Maxle thru-axle frames.

Left-hand A12 reduction sleeve for DT/Maxle, Syntace V1/V2 and Shimano E-Thru dropouts.

Replacement Nord-Lock® safety washers (4 pcs) for the A12 thru-axle bolts.

A12 axle bolt set with Nord-Lock® washers (2 bolts, 4 washers) for thru-axle Speedhub 500/14 hubs.

M6 support bolt with nut and washer for the OEM2 axle plate.

M5 adapter for mounting a fender or rack bolt on the OEM2 axle plate.

TS axle nuts M10×1 with washers (2 pcs) for threaded-axle Speedhubs.

Jubilee clips that fix the quick-release torque arm to the chainstay (CC versions).

Torque arm clamp for TS hubs – fits chainstays up to 25 mm diameter.

The frame-side block of the quick-release fixing for the long torque arm on SPEEDHUB 500/14 CC...

Torx screws (6 pcs) that fix the axle plate to the Speedhub 500/14.

Genuine screws with washers that fix the long torque arm (8230) to the axle plate of a SPEEDHUB...

Long torque arm for Speedhubs mounted with the standard axle plate.

The quick-release head (clevis with pin) connects the long torque arm to the quick release block...

Bolt and circlip for the locating fork of the long torque arm (CC versions).

A12 PM axle plate plus PM Bone – anchors the thru-axle Speedhub torque on Postmount brake frames.

CC PM axle plate plus PM Bone – complete torque support for quick-release Speedhubs on Postmount...

PM Bone – anchors the Speedhub torque on frames with a direct Postmount brake mount.

A12 PM axle plate for thru-axle Speedhubs on frames with a Postmount disc brake mount...

CC PM axle plate for quick-release Speedhubs on frames with a Postmount disc brake mount (135/170...

FAT Bone torque adapter for Postmount brakes with 203 mm rotors – for fat bike Speedhubs.

FAT Bone torque adapter for Postmount brakes with 180 mm rotors – for fat bike Speedhubs.

Monkey Bone -10 for 180 mm rotors – IS-to-PM adapter for 190/197 mm XXL Speedhubs.

Monkey Bone -10 for 160 mm rotors – IS-to-PM adapter for 190/197 mm XXL Speedhubs.

Monkey Bone 180 mm – combines Speedbone and IS-to-PM adapter for the OEM2 axle plate.