Parts

Black aluminium straightpull rear hub, 24 holes, 142×12 mm, with a 9-spline Shimano-standard...

Black aluminium straightpull front hub with a 12 mm cap, 24 spoke holes, 100×12 mm and a...

Set of two sealed bearings and two dust covers (left and right) for the eccentric bottom bracket...

Dinitrol 1000 is a transparent beige, wax-based cavity protection in a 500 ml spray can, made to...

Mounting bolts (4 pcs) for Rohloff 4-hole Speedhub brake rotors.

Complete Speedhub 500/14 service kit (version 2018) with replacement parts and tools for a full...

Brass measuring aids (165 mm and 200 mm) for setting the correct shift cable length.

XXL sprocket remover for CC 190 mm and A12 197 mm Speedhubs, incl. A12 adapter and bolt.

Sprocket remover for 135/142/170/177 mm Speedhubs, incl. A12 adapter and bolt.

Gauge for trimming the shifter cables of the internal gear mech to the correct length, whatever...

50 ml syringe that injects the cleaning oil and fresh oil into a SPEEDHUB 500/14 and draws the...

TX20 Torx T-handle key for the small screws of the Rohloff SPEEDHUB 500/14 – hub cap, axle plate,...

Oil filling tube with threaded connector for Speedhub oil changes.

Rohloff Speedhub toolkit: sprocket remover, TX20 key, oil change kit, cable measuring aids and...

Right-hand threaded A12 reduction sleeve, M12×1.5 – for DT Swiss / Maxle thru-axle frames.

Right-hand threaded A12 reduction sleeve, M12×1 – for Syntace X-12 V2 frames.

Right-hand A12 spacer for the sprocket side of Shimano E-Thru 12 mm dropouts, used with the 8592...

Left-hand A12 spacer for the disc brake side of Shimano E-Thru 12 mm dropouts, used together with...

Right-hand A12 reduction sleeve for Syntace X-12 (V1) dropouts.

Left-hand conical A12 spacer for Syntace X-12 (V1) dropouts.

Right-hand threaded A12 reduction sleeve, M12×1.75 – for DT Swiss / Maxle thru-axle frames.

Left-hand A12 reduction sleeve for DT/Maxle, Syntace V1/V2 and Shimano E-Thru dropouts.

Replacement Nord-Lock® safety washers (4 pcs) for the A12 thru-axle bolts.

A12 axle bolt set with Nord-Lock® washers (2 bolts, 4 washers) for thru-axle Speedhub 500/14 hubs.

M6 support bolt with nut and washer for the OEM2 axle plate.

M5 adapter for mounting a fender or rack bolt on the OEM2 axle plate.

TS axle nuts M10×1 with washers (2 pcs) for threaded-axle Speedhubs.

Jubilee clips that fix the quick-release torque arm to the chainstay (CC versions).

Torque arm clamp for TS hubs – fits chainstays up to 25 mm diameter.

The frame-side block of the quick-release fixing for the long torque arm on SPEEDHUB 500/14 CC...

Torx screws (6 pcs) that fix the axle plate to the Speedhub 500/14.

Genuine screws with washers that fix the long torque arm (8230) to the axle plate of a SPEEDHUB...

Long torque arm for Speedhubs mounted with the standard axle plate.